3M™ 16573 Accuspray™ Regulator and Air Flow Control Valve
3M™ 16573 Accuspray™ Regulator and Air Flow Control Valve3M™ Accuspray™ Regulator and Air Flow Control Valve is a vital component for our HVLP spray gun system. For use with any 3M™ Accuspray™ spray gun, it allows technicians to set and adjust air flow for each specific paint application, maximizing paint quality and cost savings. It can also be used with other spray guns or equipment requiring air pressure control, such as stone chip applicators.
The Regulator and Air Flow Control Valve features single knob operation, a clear, easy-to-read gauge and secure fittings for quick integration onto a 3M Accuspray™ spray gun and into the Accuspray™ system. It can also be used on non- Accuspray™ spray guns and equipment such as stone chip applicators where adjustable air pressure is important.
As one simple unit that allows you to easily set and adjust HVLP air pressure, 3M™ Accuspray™ Regulator and Air Flow Control Valve is a vital part of the Accuspray™ paint application system. This regulator and control valve in one helps ensure that operators are applying paint and other auto body materials at the optimal air pressures, greatly reducing excessive orange peel and other common causes of increased sanding and rework. With a simple twist, you can set operating air pressures for the proper flows during first stage or full trigger application and easily adjust for factors including fluid viscosity, temperature, atomizing head size and more. It makes for better consistency across jobs, too, since operators can record the readings used on one application and use them again on other, similar jobs.
Features and Benefits
- Regulator and valve in one unit allows for effortless air pressure setting and control
- Helps ensure optimal atomization for HVLP paint application, reducing rework
- Helps reduce overspray and material consumption
- Gauge provides simple, clear operation and readings for easy adjustment
- Fast setup – connects quickly to 3M™ Accuspray™ spray gun bases
- Can also be used with non-Accuspray™ equipment such as stone chip applicators.
- Air Inlet is Ľ” -19 BPS male thread
- Brand: 3M™
- Product Type: Valve
- Part Number: 16573
- UPC 00051131165731
We Also Recommend
3M™ 16000 PPS™ Standard (22 oz) Lids and Liners Kit 200 micron filter
3M™ 26000 PPS™ Series 2.0 Spray Cup System Kit 22 oz (Standard) 200 Micron Filter
3M™ 26172 PPS™ Series 2.0 Starter Kit 22 oz (Standard) 200 Micron Filter
3M™ 16312 PPS™ Midi Lid & Liner (13.5oz) 50 lids & liners per kit 125 micron